Ceramic flanges, also known as ceramic flanges or flanges, are used for connecting parts of pipes and pipes to each other and are linked to the end of pipes. There are holes on the ceramic flange, the bolt makes the two ceramic flanges tightly connected, and the ceramic flanges are sealed with a liner.

In stock of ceramic flange:

Diameter(mm): DN10,DN15;  Outer Diameter(mm): 50,90 ;
Bolt Spacing(mm): 60,75;  Flange Thickness(mm):14,18
· Special type and sizes can be customized

Ceramic flange material available:

· 95%--99.99% Alumina (Al2O3)   · Silicon Carbide   · Silicon Nitride
· TTZ: Magnesia partially stabilized Zirconia (ZrO2)
· YTZP: Yttria partially stabilized Zirconia (ZrO2)
· ZDY: Yttria fully stabilized Zirconia (ZrO2)

Ceramic flanges are disk-shaped parts that are most common in pipeline engineering, and ceramic flanges are used in pairs. In pipeline engineering, ceramic flanges are mainly used for pipeline connection. At the end of the need to connect the two pipes with ceramic flanges, each install a ceramic flanges, low pressure pipes can be used to screw ceramic flanges, more than 4 kg of pressure using welded ceramic flanges. A gasket is placed between the two ceramic flanges and then bolted tightly. Traditional ceramic flanges are made of steel, but they will be corroded after a long time and have a short service life.

Ceramic flange advantages

1, high hardness: high hardness of ceramic materials, such as alumina Rockwell hardness of HRA80-90;
2, wear resistance: measured by professional research institutions, its wear resistance is equivalent to 266 times of manganese steel, high chromium cast iron 171.5 times, according to our customer tracking survey for more than 10 years, under the same working conditions, can extend the service life of equipment at least ten times more;
3, high temperature resistance: alumina ceramic and zirconia ceramic parts can be used for a long time at a high temperature of 1050-1750℃;
4, corrosion resistance: ceramics are generally not rust, not afraid of oxidation, acid and alkali resistance;
5, good insulation: good insulation of ceramic materials, such as alumina ceramic breakdown voltage: 1mm 15KV (kV);
6. Its density is 3.7-3.95g /cm³ Only half of the steel, can greatly reduce the load of equipment.

Zirconia ceramic flange is mainly made of zirconia ceramic forming and sintering, with high strength, wear resistance, drop resistance, high temperature resistance, corrosion resistance, never rust, oxidation resistance, insulation, lubrication and other excellent properties.
The main features of the connection are convenient disassembly, high strength and good sealing performance. When installing ceramic flanges, the two ceramic flanges should be kept parallel as required, and the sealing surface of the ceramic flanges should not be damaged, and it should be cleaned up. Ceramic flanged gasket should be selected according to the design requirements.
Zirconia ceramic flanges are mainly used for the connection of cast iron pipes, hose liners, non-ferrous metal pipes and ceramic flanged valves, etc., from and process equipment and ceramic flanges.